Collection List: 0 Products   » Show Collection List «

Do you have questions about our products or services?

Just give us a call:
+49 (0) 6874 / 18 22 77

Or send your inquiry via e-mail:
info@holbach.biz

Umweltanalytik Holbach GmbH

Climate Sensor HC2A-S

  • Climate Sensor Hygroclip HC2A-S
  • Climate Sensor Hygroclip HC2A-S
  • Climate Sensor Hygroclip HC2A-S with Extension Cable
   

To avoid measuring the temperature inside the housing, we decided to use an external climate sensor.

For BiVOC2 and the Ionometer IM806V2 we optionally offer the climate sensor Hygroclip HC2A-S by rotronic.

The measurements of the climate sensor HC2A-S are transferred digitally to the devices.

Optionally, we can deliver an extension cable of 1 m length to position the sensor away from the device. However, it is not required for the operation of the climate sensor HC2A-S.

More information can be found on the manufacturer's website.

Type

Application

Acclimatisation Time of Climate Sensor HC2A-S

After a sudden change in temperature, the climate sensor HC2A-S needs, as every other climate sensor, some time until it reads the real ambient temperature.

We have conducted a test with a sudden change in temperature of 19 °C. Such changes are quite possible when the sensor is transported in a cold trunk and then brought into the heated apartment where the sampling should take place.

It took about 30 minutes until the probe read the real ambient temperature. After 10 minutes, the deviation from the real temperature was already below 3 °C, which corresponds to an error of about 1 % when converting to volumetric liters.

Note: Exposing the sensor to air flow can increase the acclimatisation rate. To determine the maximum acclimatisation time, the test has been conducted without air flow.

Scope of Delivery

The scope of delivery of the climate sensor HC2A-S:

  • Climate Sensor HC2A-S
  • Operating Manual
  • Certificate

Optionally available:

  • Extension Cable, Length 1 m

Note: The extension cable is not required for operation of the climate sensor HC2A-S with the 2-channel sampling pump BiVOC2 or the ionometer IM806V2. The climate sensor HC2A-S can be directly attached to the devices.

Acclimatisation Time of Climate Sensor HC2A-S

After a sudden change in temperature, the climate sensor HC2A-S needs, as every other climate sensor, some time until it reads the real ambient temperature.

We have conducted a test with a sudden change in temperature of 19 °C. Such changes are quite possible when the sensor is transported in a cold trunk and then brought into the heated apartment where the sampling should take place.

It took about 30 minutes until the probe read the real ambient temperature. After 10 minutes, the deviation from the real temperature was already below 3 °C, which corresponds to an error of about 1 % when converting to volumetric liters.

Note: Exposing the sensor to air flow can increase the acclimatisation rate. To determine the maximum acclimatisation time, the test has been conducted without air flow.

The scope of delivery of the climate sensor HC2A-S:

  • Climate Sensor HC2A-S
  • Operating Manual
  • Certificate

Optionally available:

  • Extension Cable, Length 1 m

Note: The extension cable is not required for operation of the climate sensor HC2A-S with the 2-channel sampling pump BiVOC2 or the ionometer IM806V2. The climate sensor HC2A-S can be directly attached to the devices.

Related Products

   

Our Products

Product Overview

Microbiology

  » MBASS30

  » LKS 30 & LKS100

  » PS 30

  » FA 30

  » AS100

Pumps
  » BiVOC2

  » MP2/39

Ionometer
  » IM806V2

Product Accessories
  » Microscope Slides

  » Climate Sensor HC2A-S

  » Carbon Tripod

  » DuoSta

  » Quick-Change Adapter

  » Gallus 2000

Merkliste
Collection List:  0 Products
» Show Collection List «
Made in Germany
Imprint  •  Privacy  •  Disclaimer